Battling Mealybugs: How to Free Your Arrowwood Viburnum From These Pesky Pests

In general, most viburnums are relatively pest-free. Occasionally, disease or insect pest problems do occur, and usually, during those times, the plants are under stress or growing in less than ideal conditions.

A variety of leaf spots are caused by the fungi Cercospora species, Phoma species, and Phyllosticta species. These fungal leaf spots on viburnum typically are angular to irregular-shaped, and the leaf tissue in the spots is sunken and dry. Spots may begin small but enlarge or merge and may be reddish to grayish brown. Fungal leaf spots typically occur during warm, moist summer months and initially will occur on older foliage. The disease anthracnose (caused by Colletotrichum species) appears as black, sunken lesions. Leaf spots and anthracnose are fairly common on viburnum foliage, but these foliar diseases are not usually serious.

Prevention & Control: Many foliar problems can be prevented by keeping leaves as dry as possible. Avoid overhead irrigation and improve air circulation with adequate plant spacing and selective branch pruning. Prune overhanging trees around diseased shrubs to reduce humidity levels and speed the drying of foliage. Hand remove spotted leaves on lightly diseased plants. Rake up and destroy infected fallen leaves, and then apply a fresh layer of mulch beneath plants. The removal of this leaf material and then applying mulch will minimize the chances of the disease reoccurring the next season.

If chemical control is needed, most fungal leaf spots and anthracnose can be controlled with fungicides containing chlorothalonil, thiophanate-methyl, myclobutanil, or mancozeb. Apply when symptoms first appear and repeat every 10 to 14 days as needed.

Algal leaf spot, caused by Cephaleuros virescens, may occur especially during cool, moist conditions. Leaf spots start as small, pale green circular spots and eventually become light brown or reddish-brown with age. Often the spots appear raised and velvety with feathered edges. When the spots become reddish-brown, they are producing their reproductive structures called sporangia. These sporangia are spread to adjacent foliage by wind and splashing rain. This pathogen will overwinter in leaf spots.

Prevention & Control: Algal leaf spots are common on several ornamental shrubs and trees, including camellias, magnolias, azaleas, aucubas, gardenias, and rhododendrons. Monitor the plants for disease problems, practice good sanitation as stated with fungal leaf spot control, and treat any other landscape plants in the area that have algal leaf spots. Algal leaf spot can be controlled with sprays of copper fungicides (see Table 1 for specific products). Apply when symptoms first appear and repeat every 10 to 14 days as needed.

Viburnum species may become diseased with powdery mildew caused by the fungus Erysiphe viburni. The occurrence and spread of this disease is favored by a combination of warm days, cool nights, and humid conditions but is inhibited by rain. Powdery mildew is worse on plants in the shade.

Powdery mildew of viburnum primarily affects young leaves and shoots. Affected plant tissues develop a powdery white to light gray growth of fungal mycelia. The fungus is mostly found on the upper leaf surface but also may be found on the lower leaf surface. The disease typically appears in the summer and reaches its peak in late summer. Developing leaves may be deformed by severe infections.

Prevention & Control: Since high relative humidity is an important factor favoring disease development, certain cultural practices can help prevent the disease or decrease its severity. Sanitation and measures discussed for fungal leaf spot control will aid in powdery mildew control. Additionally, some cultivars, such as Viburnum burkwoodii ‘Mohawk’ and V. carlecephalum ‘Cayuga’, exhibit some resistance to powdery mildew.

Powdery mildew can be controlled with fungicides containing myclobutanil, propiconazole, thiophanate-methyl, or horticultural oil (see Table 1 for specific products). To prevent foliar injury, apply 2% horticultural oils for powdery mildew control only if temperatures are below 85 °F and when no rainfall is forecast for the next 24 hours. NOTE: Although sulfur is sometimes used for powdery mildew control, it is not recommended for sulfur-sensitive plants, such as viburnums.

The fungus Plasmopara viburni causes downy mildew on viburnums. This foliar disease occurs and spreads rapidly during cool to warm weather conditions coupled with periods of leaf wetness. Initially, this disease appears as light green spots on the upper leaf surfaces. The spots enlarge to form angular patches between the leaf veins. On the lower leaf surfaces, downy grayish-white fungal growth appears.

Downy mildew disease is different from powdery mildew in that the fungal growth is observed on the lower rather than on the upper leaf surface. The infected areas redden and then turn brown as the leaf tissue dies. Infections of the foliage in the spring can result from splashing spores produced by the diseased foliage remaining on the ground from the previous year. Defoliation may occur if the disease is severe.

Prevention & Control: As with other foliar diseases, downy mildew occurrence and severity may be reduced by keeping the foliage as dry as possible. Do not use overhead irrigation. When planting viburnum or other nearby plants, allow for adequate plant spacing. Prune back adjacent shrubs or overhanging tree limbs. These steps will improve air circulation around the plants and aid in the drying of foliage. Rake up and burn or dispose of infected fallen leaves and apply an additional layer of mulch beneath the shrubs.

If fungicides are necessary, sprays should adequately cover both the upper and lower leaf surfaces. Fungicides labeled to control downy mildew include mancozeb or chlorothalonil (see Table 1 for specific products).

Botryosphaeria Dieback & Canker

The fungal disease called Botryosphaeria dieback and canker, caused by Botryosphaeria species, is most likely to occur on plants suffering from drought stress, bark injuries, pruning wounds, or other environmental stresses. Healthy plants are much more resistant to infection by Botryosphaeria, as plants will wall off the fungus and prevent its spread through the branch.

Upon entry via a wound, the fungus kills cambium and sapwood tissue, causing sunken dead areas called cankers. The cankers are small initially but enlarge or coalesce (merge) into large areas that girdle the branch or trunk. Water movement is stopped beyond that point and results in a rapid wilting or browning of foliage. Branches with cankers may fail to leaf out in the spring and die.

Prevention & Control: Water shrubs weekly during the growing season if insufficient rainfall occurs (see HGIC 1056, Watering Shrubs & Trees). Mulching shrubs helps to avoid mechanical injury to trunk and limbs by weed trimmers and lawnmowers. Mulch shrubs with a 2- to 4-inch layer of bark, pine needles, or ground leaves, and avoid piling the mulch against the trunk.

Prune any branches with cankers back to green, healthy wood. If entire branches must be pruned, cut the limb just outside the swollen branch collar and not flush with the trunk. Disinfect the pruners between every cut with a 70% alcohol or 10% bleach solution. Burn or dispose of all prunings, as this plant material is a potential source of disease for viburnums, as well as other woody shrubs. No fungicides are recommended for the control of fungal cankers, but pruning wounds may be immediately sprayed for protection with a benzimidazole fungicide, such as thiophanate methyl (see Table 1 for specific products).

Armillaria root rot is also known as shoestring root rot, mushroom root rot, and oak root rot. It is caused by the fungus Armillaria mellea, which is common in landscape and garden settings. This fungus can rot the roots of many different kinds of plants. Most often, this disease is found on trees and shrubs, such as oak, pine, rhododendron, and dogwood, but hundreds of plant species, including viburnums, are susceptible. Typically, the symptoms of this root rot occur over the whole plant. Above-ground parts of the shrub generally appear stunted and yellowed and leaves may drop. The unhealthy foliage may become more sparse over a period of several years. However, there may be no evidence of any problems, and suddenly the shrub will die. The cause of the unhealthiness or death may be difficult to determine, as similar symptoms may be caused by environmental factors, such as weather stress or a general lack of plant care.

Armillaria root rot can be distinguished from other root rots, from drought, or excess moisture injury, by examining the crown (lower trunk) and upper roots of the plant. If Armillaria is responsible for the plant’s decline, white felt-like fungal growth can be seen under the bark if the bark is carefully peeled back. If sufficient bark is removed, the leading edge of the fungal growth will be found, and this white growth has a characteristic fan-shape. The Armillaria root rot fungus also forms black, string-like fungal strands about 1/16-inch in diameter or less. These strands may often be seen between the bark and the wood, or on the surface of the roots, or in the nearby soil. These string-like fungal strands are called shoestrings and look very similar to roots.

Prevention & Control: Provide good growing conditions for the viburnum, especially additional water during droughts, good soil drainage, and proper fertilization.

An infected shrub whose entire root system or trunk is diseased cannot be saved. When a shrub dies from Armillaria root rot, the large roots in the vicinity of the trunk as well as the trunk itself should be removed and destroyed. The soil in the immediate vicinity should also be removed. Avoid replanting the same species as the one removed.

Snowball aphids (Neoceruraphis viburnicola) most often occur on European cranberry bush and snowball viburnums. They can cause twisting and curling of the young growth. These aphids are gray to dark green and feed in clusters at the tips of the branches, causing leaf curl. They feed by piercing plant tissue and sucking plant sap.

Prevention & Control: They usually cause little or no appreciable damage. Viburnums can be sprayed with insecticidal soap or horticultural oil to control aphids. Soaps and oils must be sprayed onto the aphids to be effective. Spray the foliage thoroughly, including the upper and lower leaf surfaces. Repeat spray three times at 5- to 7-day intervals. Only apply horticultural oils or insecticidal soaps if temperatures are below 85 °F.

If higher toxicity insecticides are deemed necessary, sprays containing acephate, bifenthrin, cyfluthrin, cyhalothrin, malathion, neem oil, permethrin, or pyrethrin will control aphids. Soil drenches or granular applications of imidacloprid or dinotefuran will control aphids and last longer within the plant to prevent future infestations (see Table 1 for specific products).

Flower thrips (Frankliniella species)are pests of both viburnum leaves and flowers. Thrips are slender, dark-colored insects with fringed wings, and the adults are less than 1/16-inch in length. To see these small, fast-moving pests, you need a magnifying lens. Thrips are typically found on leaves and between flower petals, where both adults and nymphs (immature insect stage that resembles the adult but smaller) feed by scraping surface cells to suck plant sap. Thrips feed on expanding leaves, which creates purplish-red spots on the undersurfaces and causes foliage to severely curl or roll, then drop prematurely.

When they feed on flower buds, the flower may die without opening. With a light infestation, their feeding causes leaves to have silvery speckles or streaks. With severe infestations, leaves and flowers are stunted and distorted and may turn brown and die. Because of their small size, thrips are difficult to detect before damage is obvious. To sample for thrips on viburnum foliage, hold a sheet of stiff white paper under injured leaves, and then shake or tap the branch. Gently tip the paper to remove any bits of trash and then examine the paper in bright sunlight. Any thrips present will move around on the paper.

Prevention & Control: Several naturally occurring enemies feed on thrips. Contact insecticides should be avoided as much as possible to prevent killing these beneficial insects, which reduce thrips populations. Grass and weeds in the area should be kept mowed or removed when possible.

If it becomes essential to spray an insecticide, the following are available in homeowner-size packaging: spinosad, acephate, bifenthrin, cyfluthrin, lambda cyhalothrin, or permethrin. Spray when thrips are present and again in 7 to 10 days. Both spinosad and acephate are foliar systemic insecticides that may give better control. To protect pollinators, do not spray once plants are in bloom. Insecticidal soaps will help control thrips, but thorough coverage is necessary. The soap spray must contact the pest to be effective and may require three sprays at 5- to 7-day intervals. Spray an insecticidal soap when temperatures are below 85 °F. Soil drenches or granular applications of dinotefuran or imidacloprid will give some thrips suppression. See Table 1 for specific products.

The southern red mite (Oligonychus illicis) is a dark reddish or brown-colored mite that is a common pest in the Eastern US. Azaleas, camellias, and hollies are the primary hosts for this mite, but it occasionally infests many other species, including viburnums. The southern red mite is active in the cool weather of spring and fall and overwinters as eggs.

Mites have needle-like piercing-sucking mouthparts. Damage to the foliage begins on the lower leaf surface where feeding begins, but as populations increase, the upper leaf surface is fed upon as well. Over time the leaf tissue collapses, the foliage turns grayish-brown, and the damaged foliage drops.

Prevention & Control: Spider mites can be removed with strong sprays of water if applied on a regular basis. Insecticidal soap or horticultural oil are the least toxic spray alternatives to protect beneficial insects, people, and the environment, and they can provide control when applied before population numbers get too high. Both the lower and upper leaf surfaces must be sprayed for good control. Two or three applications may be required at 7- to 14-day intervals. To determine if additional spray treatments are needed, shake or tap branches over a piece of white paper. Then look for reddish-brown specks that move around. Follow label directions for the insecticidal soap spray. Use a 2% horticultural oil spray (5 tablespoons horticultural oil in a gallon of water).

The following pesticide is labeled for use by homeowners against spider mites: tau-fluvalenate (see Table 1 for specific products). These miticides should be applied when mites are present and again in 7 to 10 days. Do not use soil drenches of products containing imidacloprid, as this may kill predator mites and increase spider mite populations.

Armored scales, such as the oystershell scale (Lepidosaphes ulmi), can infest viburnum and cause branch dieback. If the infestation is severe enough, they may kill the shrub. The oystershell scale can overwinter as full-grown females that are attached to the bark or as eggs that are beneath the adult scale covering. The adult female is 1/8-inch long, brown or gray, and generally the shape of an oyster shell.

Crawler (immature stage) activity often coincides with the flush of new plant growth in the spring. These crawlers are pale, smaller than a pinhead, and are the only mobile stage of the scale life cycle. Within a few hours, the crawlers will settle in a suitable spot to begin feeding and excreting a waxy covering for protection.

Prevention & Control: Light infestations of scale can be scraped off by hand. Prune out and dispose of any heavily infested branches. A 2% horticultural oil (5 tablespoons of horticultural oil per gallon of water) can be sprayed in the early spring before new growth begins to kill overwintering adults and eggs. Horticultural oil may be sprayed when temperatures are between 40 and 85 °F with no rainfall predicted for 24 hours.

Monitor the crawler emergence in the spring with sticky cards, double-faced tape wrapped around a branch, or by putting an infested shoot or leaf into a baggie and watching for crawler movement. Spray with horticultural oil in the spring after the plants begin growing and the danger of cold weather has passed. Repeat this application after 10 days to better control the crawlers, adults, and eggs by smothering them.

Avoid using more toxic insecticides unless the plant is seriously damaged from the scale infestation. These insecticides will often kill the naturally occurring predators of scale. If insecticides are going to be used, spray when crawlers are observed, as this is the only stage in the life cycle that is controlled by contact insecticides. Contact insecticides labeled for homeowner use against scale crawlers include acephate, malathion, bifenthrin, cyhalothrin, and cyfluthrin (see Table 1 for specific products). Alternatively, a soil application of a product containing dinotefuran may be applied around the plant in spring for scale control on viburnums.

Root weevil adults, such as the black vine weevil (Otiorhynchus sulcatus), feed on foliage, and the injury shows up as ragged notches on the leaf edges. Although the foliar damage is not generally severe, it can be very unsightly. The adult weevil is a black, wingless weevil about ⅜-inch long. The adults are nocturnal feeders and move up onto the plant at sundown. On sunny days, they are found in the leaf litter beneath the viburnum canopy.

Root weevil larvae cause damage by chewing and girdling roots, and damage usually begins in spring to early summer and continues through the growing season. The larvae are white, legless grubs with a brown head and C-shaped appearance. They are found in the soil around the viburnum roots.

The grubs cause more significant damage than do the adults. Plant growth may become stunted, and the foliage may become pale green or yellow. Root and crown feeding by the grubs may kill the shrub.

Prevention & Control: For successful control, treatments should be directed at the adult weevils. Once foliar damage is observed, insecticidal sprays should be made at 2- to 3-week intervals, where three sprays are usually sufficient. Along with the foliar applications, also treat the surface of the soil or mulch immediately beneath the plants (as a spray, not a drench) because this is where the adults will hide during the day. Insecticides labeled for adult weevil control include bifenthrin, acephate, permethrin, cyhalothrin, and cyfluthrin. A soil drench around the base of the shrub with imidacloprid or dinotefuran can be used to control the adult weevils when they feed on the foliage (see Table 1 for specific products).

Table 1. Insecticides and Fungicides for Viburnum Insect Pest and Disease Control

Pesticides are updated annually. Last updates were done on 2/21 by Joey Williamsom.

If this document didn’t answer your questions, please contact HGIC at [email protected] or 1-888-656-9988.

Joey Williamson, PhD, HGIC Horticulture Extension Agent, Clemson University

This information is supplied with the understanding that no discrimination is intended and no endorsement of brand names or registered trademarks by the Clemson University Cooperative Extension Service is implied, nor is any discrimination intended by the exclusion of products or manufacturers not named. All recommendations are for South Carolina conditions and may not apply to other areas. Use pesticides only according to the directions on the label. All recommendations for pesticide use are for South Carolina only and were legal at the time of publication, but the status of registration and use patterns are subject to change by action of state and federal regulatory agencies. Follow all directions, precautions and restrictions that are listed.

Join our mailing list to receive the latest updates from HGIC.

How to Get Rid of Mealybugs – Part 1 of Logee’s “Pest Prevention” Series

FAQ

What is the fastest way to get rid of mealybugs?

How do you get rid of mealybugs on shrubs?

What is the best killer for mealybugs?

How do you treat viburnum pests?

How do you get rid of mealybugs on a plant?

Mix into 1 quart of water and steep for 1 hour. Step 2: Strain through a cheesecloth and add 1 tablespoon of liquid dish soap. Mix well. Step 3: Spray the solution on the plant parts where mealybugs are present, including the underside of the leaves. Step 4: Repeat as needed after a few days if you detect more mealybugs.

Should you prune a plant if you have a mealybug problem?

Additionally, pruning can be stressful for plants, so it should be done carefully and only as needed. Systemic insecticides are a type of pesticide that are absorbed by the plant and transported throughout the plant’s tissues, providing longer-lasting protection against mealybugs. Here’s how to use systemic insecticides to control mealybugs:

Are arrowwood viburnum shrubs poisonous?

Arrowwood viburnum shrubs don’t have serious issues with most pests or diseases. However, they might be bothered by the viburnum leaf beetle ( Pyrrhalta viburni ). This beetle has become a major problem for viburnum shrubs in Europe and North America. Both the adult beetles and their larvae eat the leaves of the bushes.

What are the most common viburnum pests?

Here are some of the most common viburnum pests and methods for viburnum pest control. Aphids – While they don’t cause much damage, aphids can cause curling in new growth. They can be gotten rid of with a steady stream of water from the hose, insecticidal soap, or horticultural oil.